Recently Completed Jobs by Politon

March 22, 2021 | Coppell, TX

We ended up installing over 100 Cat 6 cables for Neurolens new Coppell, TX headquarters along with seven wifi access points and a single-mode fiber optic cable to their exterior demarc. One of the challenges to this project was this was an existing space that was subdivided into two suites so there ...

February 24, 2021 | Irving, TX

We cabled the new lab for GreyStone Laboratories.  We pulled 13 cables and installed a Leviton Quick Disconnect 24 Port Patch Panel.  We also provided a 24 port Netgear POE switch. The customer was extremely happy with the final result.  This customer called us from the internet and needed a cabling vendor that ...

February 24, 2021 | Fort Worth, TX

Our techs ran six Cat 6 network cables from the production area for several manager desks in a bull pen-type area back to the server room.  We provided surface mount  2 port Leviton boxes at each of the three desks.  The customer was happy with the completed work.  ...

February 22, 2021 | Dallas, TX

The customer, Rudolph's Meat Market, is a 100-year-old full butcher shop, located in the heart of downtown Dallas on Elm St. They called us after the huge snowstorm, that caused tons of damage due to power outages all over Texas.  We got on-site, that same day, and were able to ...

February 22, 2021 | Fort Worth, TX

We installed approximately eight IP phones.  We removed their old Partner ACS phones and ported the line to their new IP phones.  

February 12, 2021 | Irving, TX

This was a small job where we pulled about eleven new Cat 6 cables and moved their existing patch panel onto a vertical wall mount bracket so we could add the network switch parallel to it.  They had a very small network closet, so this was not the prettiest solution but ...

February 11, 2021 | Prosper, TX

We installed two Category 6 network cables in their office and tested them so they could use a hardwired connection instead of wifi which they were having issues with.  We are happy to meet new customers and hope they will have us back out when they grow.

February 5, 2021 | Dallas, TX

We provided several solutions for Gold's Gym new corporate offices in Dallas, TX.  The main solution we provide was network cabling with over (130) Cat 6 wire runs.  The suite had an existing two-post rack and ladder rack connected to the wall.  We stripped everything off of it and supplied all-new patch ...

February 3, 2021 | Dallas, TX

This was a great project for us and had many different installation applications.  This Dallas data cabling job consisted of over 400 cables as well as a fiber optic demarc extension.  We installed six projectors, 6 pull-down screens, ten flat screen tv's with one being an 85" flat screen in the board room.  ...

January 7, 2021 | Dallas, TX

We ended up terminating and testing this fiber optic cable with customer provided LC unicam connectors. Tested and certified all 6 strands between the floors.  The only obstacle was there was no light in one of the network closets so we used flashlights.

December 17, 2020 | Fort Worth, TX

This was a pretty typical warehouse fiber installation.  The only difficulty we had was that they did not want to use our originally proposed network cabinets but wanted to use a more subtle enclosure that you would not suspect network equipment was in it such as a NEMA type box.  ...

December 6, 2020 | Fort Worth, TX

The solution we implemented was an outdoor loose tube single-mode fiber installation with 6 strands at their Fort Worth TX location.  The fiber cable pull through underground conduit with several ninety degrees turns was very difficult but we got it pulled.  The next step was to strip back the cable and ...

October 26, 2020 | Midlothian, TX

This customer thought they had damaged their fiber between their main building and their repair center down a hill on their property. When we inspected the fiber we noticed they had armored 6 strands multi-mode fiber optic cable running through the conduit. The cable did not appear damaged so we decided ...

October 26, 2020 | Carrollton, TX

We provided the customer with a quote to install approximately 12 wifi access points across their warehouse for use with their bar code scanners while picking orders.  The customer had several problems upon our network site survey and that was they had way too few access points to cover the number ...

October 21, 2020 | McKinney, TX

When arriving on site we discovered that the customer had Singlemode loose tube 12 strand fiber optic cable between their Toptracer camera system and their clubhouse at the Eldorado County Club in McKinney TX. The customer was thinking they had multi-mode 6 strand tight buffer fiber so this caused a problem for ...