Recently Completed Jobs by Politon

September 25, 2026 | Denton, TX

On-site service completed for paging system troubleshooting. Identified that the customer-supplied Bogen UTI1 lacked adequate power output for the speaker load across both floors. Sourced and installed two Valcom power supplies to properly power each floor, repaired several degraded wire connections, and re-adjusted all speaker volume levels. The system is ...

September 7, 2026 | Prosper, TX

We wrapped up the full commercial audio installation, including all speakers, the amplifier, and the system controller. On-site, the customer added a TV mount to the scope. The builder-constructed wall cavity was shallower than expected, which caused the standard bracket from the AV package to stick out too far. To ...

May 11, 2026 | Lewisville, TX

We installed approximately 55 Cat 6E data cables in their office space.  Their office space was in operation during the time of our installation, so we had to take some care not to disturb the customer in the process.  The second part of our scope of work was to ...

April 15, 2026 | Dallas, TX

The customer previously shipped out their new Wifi access points to the site so when we arrived that morning, the hardware was on site.  The maintenance technician had already moved the 19 ft scissor lift inside the gym for us, which made this a low-stress job.  We used the ...

April 6, 2026 | Lewisville, TX

We helped SiriusXM install Cat 6 plenum-rated network cabling in their new space in Lewisville, TX, enabling them to connect multiple Wi-Fi access points, a networked cellular repeater, and staged cabling for several workplace cameras. All cabling was routed back to their temporary data room and connected to their network switches ...

December 1, 2025 | Lake Dallas, TX

The project scope expanded to include the installation of numerous TVs, cameras, and Wi-Fi access points.  We also helped them install several Logitech conference systems in their conference rooms. In the cover picture attached we installed all four touchscreen POE timeclocks, both 85" TVs, and both Cisco dome cameras.  ...

November 18, 2025 | Fort Worth, TX

We installed all customer-provided hardware in two conference rooms for our customer. They used the Logitech system, composed of a table hub, display hub, camera, and two speakers. They also used a roommate pc, two 85" monitors, a tabletop touchpad, and a door entry scheduler that we mounted in front of ...

November 7, 2025 | Denton, TX

We successfully installed over 250 Cat 6 data cables, two dozen Wi-Fi access points, and a fiber connection between buildings. Our team also mounted all customer-provided data switches in the rack and completed the patching. The project covered both floors of the client’s new office building, where we used 6-strand multimode ...

September 19, 2025 | Fort Worth, TX

The solution was rather simple, but it serves as a good example of why it is best to call the experts first. The first issue I noticed was the presence of single-mode fiber patch cords in the DoG clock fiber enclosure and the tech booth. The fiber optic cable connecting ...

August 20, 2025 | Denton, TX

We installed their Wifi and Camera network over the course of the final stage of the warehouse's construction. The customer was able to start operations on day 1, and we subsequently finished out the rest of the project while navigating around the unique challenges of ongoing operations as well as the ...

January 17, 2025 | Frisco, TX

Each conference room was different, so we tailored our solution to be different for each one. Each room required a Room Navigator mounted next to the door on the outside. The customer also requested we hide the cables from the top of the table, so we drilled holes in equally ...

January 15, 2025 | McKinney, TX

In addition to installing a network cabinet and switch provided by the customer, we took all the necessary network equipment and consolidated all of it inside the cabinet. There were powerstrips plugged into other powerstrips and some unused equipment that was taking up space, so we cleaned that up as ...

November 27, 2024 | Denton, TX

We installed approximately 35 cables between four different rooms in the office. We ran them from office outlets to their data rack. All cable was tested and labeled. We tested all the cable with a Fluke DSX 5000 to certify the cable for Cat6.

October 18, 2024 | Dallas, TX

Our Technicians, Clark Hise and Seth Polley, pulled a 6-strand OM4 Multimode Fiber, connecting the two IT closets. The pull was routine and no major hurdles were encountered. Once the fiber was secured, it was tested and certified with our OWL tester. We enjoyed doing business with the Department of ...

October 8, 2024 | McKinney, TX

We pulled two data cables and installed two Wi-Fi access points. The employees at this location let it be known that Wi-Fi coverage up until this point had been spotty and were grateful to have a new system in place. Once the APs had been installed, our technician worked with ...