Recently Completed Jobs by Politon

April 21, 2022 | Plano, TX

The COACH Store in Plano, Texas, needed three ATAs installed. This job included the following tasks: * Pulling a Cat 6 cable through the wall, over the suspended ceiling, and down to phone system * Terminating three pairs of cables on both ends with RJ11 connectors * Testing the lines for good quality

April 19, 2022 | Flower Mound, TX

Overture Flower Mound contacted us about problems with their Mircom TX3 card access system, which was coming up intermittently or not at all. When we assessed the situation, we discovered the fiber was singlemode but the patch cords and SFPs were multimode. After replacing the multimode patch cords and SFPs ...

April 18, 2022 | Burleson, TX

The Saddle Creek South location in Burleson, Texas, requested an Ethernet drop to a time clock outside the central office. We started running a cable from cabinet 9 which is mounted 35 feet up on a post. From there, we went across the girders and inside the 40-foot-high walls of the central ...

April 18, 2022 | Dallas, TX

After Reddy Ice in Dallas, Texas, had a heat treatment done in their facility, they discovered the treatment got too close to a network panel and melted the faceplate and jacks. They called us, and we were able to respond quickly to replace the faceplate and jacks.

April 8, 2022 | Burleson, TX

The Saddle Creek South location in Burleson, Texas, contacted us to install two Ethernet drops in the guard shack. Fortunately, Politon had already run fiber to the guard shack and installed a switch, making the job easier. After finding a path from the switch to the guard's desk, we routed, ...

April 7, 2022 | Garland, TX

This was the third project that we have teamed up with Insane Impact which specializes in large event LED screen installations.Insane Impact needed a fiber connectionfrom their data cabinet in one building out to their large wave pool LEDdisplay. We ended up installing an outdoor rated 10G multi-mode fiber ...

April 6, 2022 | Dallas, TX

Betson is a division of H Betti Industries and is located in Dallas, Texas. They contacted us to work on their paging system. Some of the existing speakers were not working; additional speakers were needed. First, we mounted new horn and flush mount speakers, pulled new speaker wire, and toned ...

April 4, 2022 | Euless, TX

We have worked with Dalworth Restoration in Euless, Texas, for a long time. This job consisted of several tasks: * Cut in and install a single-port Ethernet jack * Identify the cables for two Ethernet jacks, label them, and plug them into the switch * Reseat the connection to a security camera that ...

April 1, 2022 | Plano, TX

Munoz Technology Solutions in Plano, Texas, was moving a customer into a new location where fiber cables needed to be terminated. We terminated all the fibers in rack mounted fiber trays and then tested the fibers to ensure they were working properly.

March 18, 2022 | Fort Worth, TX

Firebirds Wood Fired Grill in Fort Worth, Texas, requested a new patch panel and additional Ethernet drops to the front terminal. This job included the following tasks: * Installing the new patch panel * Pulling new cables * Installing jacks on both ends * Testing to ensure everything was working properly Fort Worth is ...

March 11, 2022 | Fort Worth, TX

Saddle Creek Logistics Services in Fort Worth, Texas, requested additional Ethernet drops. This required changing the existing small switch to a larger switch to provide more ports. The new switch we installed made it possible to add the additional Ethernet drops as well as an additional access point in an ...

March 10, 2022 | Dallas, TX

Cliff Price is a wholesale showroom in the Dallas Market Center that offers fashion, home, and gift products to entrepreneurs and buyers in the South. Upon completion of a remodeling job, they wanted to install new speakers. We did the installation and also balanced the audio on the existing speakers ...

March 8, 2022 | Fort Worth, TX

Sam's Club in Fort Worth, Texas, was installing a conveyor system in their warehouse and asked us to add a fiber connection back to the main data room. The tasks needed to complete the job included: * Pulling six-strand armored multimode cable * Installing fiber trays in the data room and the ...

March 7, 2022 | Grapevine, TX

Located in Grapevine, Texas, Productiv Inc. had been sharing a warehouse with another tenant. When that tenant vacated, they cut most of the cables running through their data room which stopped all service to Productiv. After service was restored, the customer asked us to the move their data room to ...

March 4, 2022 | Frisco, TX

PowerFleet, located in Frisco, Texas, contacted us to investigate issues with their GPS system which was installed in their lab. Although the lab is on the top floor of the building, they were unable to see any GPS satellites. We moved the antenna from the lab to the roof and ...