Cabling & Network Services

Cabling & Network Services in Dallas-Fort Worth

Cabling & Network Services

Network cabling is the backbone of your business. It’s what connects all of your systems together to help you do what you do best. Computer use and speeds have changed dramatically in the last decade. Traditional phone systems are being replaced by VOIP(voice over internet protocol) systems, which can give your business economic and functional efficiencies that did not exist several years ago. The right type of network cabling must be used to utilize all the new cost-saving technologies that are now available.

With years of experience at structured data cabling in the Dallas/Fort Worth area, Politon can help you design a solution to meet your current and future needs. If your business needs cabling for a new VoIP phone system or a traditional PBX, Politon has years of experience helping customers grow their business. Contact us today at 214-441-7173 to find out what our telecommunications professionals can do for your business.

Services Include:

  • Cabling Site SurveysCabling site surveys are essential to overcoming obstacles and allowing for the most accurate, cost-efficient quotes. Our data cabling professionals know what issues to look for and how to overcome them.
  • Demarc Extension ServicesA demark extension is how we take the phone/data services that the phone/data company has provided for your business from one area to another. Typically the demarc room is on the outside corner of the building (MPOE) and your data closet (MDF) may be located anywhere in the building. Politon can extend those data connections via fiber or copper depending on the connection type to your suite whether your in an office, strip center, high rise or warehouse.
  • Network Wiring TestingCopper and fiber cabling is the backbone of your IT systems. We test both fiber and copper networks.
  • Structured Cabling InstallationOur structured cabling services can plan, design and install whatever your cabling needs (Cat 5e, Cat 6, fiber, coax). Politon can maintain, troubleshoot or upgrade any size network from small retail locations to large million-square-foot warehouses.
  • Wi-Fi Network InstallationWi-Fi installations are usually determined by square footage of space and design. Each location is unique and will have a solution custom-designed for number, models, and locations of Wi-Fi access points.
  • IT Installation – Politon can be your Smart Hands tech resource for when your staff does not have either the reach or time to perform plug and play solutions for IT hardware to your business locations. We can replace your IT hardware locally in the Dallas/Fort Worth area or nationwide. We have performed services such as replacing or adding a network switch, firewall device, LTE router, desktop PC, printer, POS, EMV (CC machine), RAM, networked time clock, Wireless Access Points or UPS (battery backup).
  •  

    Recent Cabling Installation Jobs

    Recently Completed Jobs

    See All

    Fort Worth, TX

    Their current technology was originally located on multiple different floors, but Politon helped to connect each of these locations for greater efficiency. Politon added two post data rack from the MDF to the cubicles located on the fifth floor, which took about 200 CAT-6 data drops. They then added multimodal fiber between the new data room with the new post rack and the MDF and proceeded to create a new IDF on a different floor to better feed connections to future users. Politon also assisted with cabling for security purposes by pulling cables from eight different access points and POE cameras around the suite in hopes of providing optimal assistance. By the end of the project, the insurance company was highly satisfied with the work done by Politon and were delighted to consider themselves a customer of their company.

    Garland, TX

    The company’s MDF was based on the second floor but needed fiber extension to the IDF on the first floor. Thus, Politon completed this extension in addition to installing a fiber tray on both sides using an OM-3 multimode 6-strand fiber, which was also certified with a Owl Fiber Certification tool between both floors. They also pulled 6 CAT-6 data runs from the second-floor MDF closet to the IT help desk, which helped to provide a hardwire wifi connection between both areas. Throughout the entirety of this project, Politon did not face any major challenges in relation to the installation.

    McKinney, TX

    They first ran multimodal fiber to the first floor, where they had just installed a new suite. Politon made sure that all their offices had data cable by installing a network cable that increases available fiber connections. Morrow Renewables also gave Politon their network switch to install in this location, where Politon also put in a new battery that they provided for the customer. The key to this situation was a turn-key tabling solution, where Politon did everything to extend the entire network down to the suite. Everything was working perfectly once Politon fired everything up. From there, Politon installed a customer-provided wifi access point in the center and the ceiling of their main office, which would allow for greater wifi coverage from all locations of the facility. Whether customers were on the first floor or the third floor, everyone would have the same wifi network thanks to the OM-3 strand multimodal fiber that Politon installed. By the end of the project, Morrow Renewables was extremely satisfied with the work completed by Politon.

    Dallas, TX

    In order to secure their Wi-Fi connection, we added seven new Wi-Fi access points that allow their handheld RF guns to be used efficiently anywhere in the warehouse. Before the day was complete, we also installed a dual network drop to accommodate a new workstation and provided a sixteen-port network switch that was uplinked to all the new Wi-Fi access points.

    Dallas, TX

    Continental Electronics Corporation(CEC) is the premier manufacturer of advanced radio frequency and broadcast transmission. They have completed various projects and are among the leading competitors in high-power transmitters. In fact, CEC very own high-power transmitters are used by the Navy forces around the globe to communicate with submarine fleets as well as NASA to communicate with spacecraft. While on their campus our team pulled six stands of multimode armored fiber across the building. In order to do this we drilled holes in the wall to allow for the fiber to easily reach the opposite side of the campus. However, while running the cables our team found asbestosis in the older parts of the building. This added an unforeseen obstacle but our team worked tirelessly to work around the situation. By the end of this project, both Continental Electronics corporations was happy to have a new area of their department fully operational with their very own network switch.

    Coppell, TX

    Long-time customer Ariat Boot Distribution is expanding to a new warehouse in Coppell, Texas. The building that they are expanding to was previously utilized by a tenant and needed some upgrades in order to keep up with the growing company. The warehouse had some previously existing data cabinets around the warehouse. Our team was called in to run fibers and install network switches to the existing cabinets in the main data room. In order to maximize the connections and communications between employees in the warehouses, we installed and plugged in eight wifi access points into the network switch around the offices and warehouse. In order to maintain security, we installed four cameras to monitor aisles. Because this warehouse was previously occupied, we needed to test each of the thirty existing cables in the offices to provide utmost proficiency in our customers' new office. Our customer was pleased with the work of our team, and we discussed coming back for future projects.

Fields with (*) are required.