Recently Completed Jobs by Politon

July 23, 2024 | Ponder, TX

Because there were no existing conduits between the buildings, and trenching would be cost-prohibitive, Politon provided a Ubiquiti P2P solution. The dishes were mounted facing each other in a space that would not be covered up by trucks being loaded or unloaded. Because a pre-programmed P2P device was ...

June 20, 2024 | Lucas, TX

We ran a 6 strand single mode fiber optic cable across the building, traversing varying heights and navigating around an active construction site. Once the fiber was in place, we terminated it on both ends and certified it. We have worked in both public and private schools and understand the unique ...

June 5, 2024 | Arlington, TX

Our tech installed three Cat 6 wire runs for new hosted IP phones for the Arlington store. All cables were tested and labeled and the customer was very pleased with our ease of installation and everything worked perfectly.

May 10, 2024 | Dallas, TX

We ran data cabling through three buildings on site and installed two IDF cabinets we provided to ensure full coverage and enable the customer to have a more organized network. The exterior access points were attached to arm mounts, allowing the devices to be pointed in the appropriate direction. Being ...

May 6, 2024 | Irving, TX

We provided new LC Fiber connectors on both ends as well as a bulkhead that was specific to the Panduit fiber tray that the customer already had installed. Our goal at Politon is first and foremost to provide a solution that works for our customers, and often that means working ...

April 26, 2024 | Fort Worth, TX

The initial phase of this solution is to install paging horns and ceiling speakers throughout the facility. The second phase of this project is to install SIP paging strobes and emergency push buttons that can alert the employees with a specific message on the speakers and a matching color on ...

April 16, 2024 | Haslet, TX

Over 2 weeks, we terminated and certified over 400 single-mode fiber strands. Most cabinets required a man lift to gain access. We worked closely with the customer to ensure that each IDF was standardized according to their criteria. Because we have multiple certified fiber optic technicians at Politon, we completed the job ...

March 27, 2024 | Grand Prairie, TX

We implemented a Wifi solution for both the warehouse and office areas, installing around eight Wifi access points in the warehouse and one in the office. For security purposes, we set up eight cameras in the warehouse, two in the office, and one outside the building. Hikvision cameras were chosen ...

February 22, 2024 | Tulsa, OK

Politon has many customers who conduct business in unique environments, and Reddy Ice is no different. Several cameras were installed within the ice warehouse and production areas. Our employees dealt with running cable through freezing temperatures inside and installing cameras adjacent to fans blowing sub-zero wind. We also installed a ...

December 18, 2023 | Fort Worth, TX

We ran the cable from their IDF to the exterior of the building. For a professional look, we drilled through the 8-inch thick concrete exterior wall, ran conduit on the interior side, and mounted the box for the time clock, as pictured. There was a previous hole drilled in the ...

December 15, 2023 | McKinney, TX

We used a few new pieces of equipment from Ubiquiti for this project. First, because of a space limitation, the customer could not have a typical Ubiquiti Dream Machine that we usually install, so instead we used the Ubiquiti Dream Router. The customer provided us with a shelf to install ...

December 12, 2023 | Pilot Point, TX

We installed IP Cameras within four separate buildings each with its own NVR. The customer did not want to network these buildings together but wanted to have remote access to the NVR of each building. We installed approximately 40 IP security cameras with infra-red night vision. Some cameras are mounted on ...

November 29, 2023 | Duncanville, TX

The customer started their paging project by calling Bogen to get a list of equipment to install in their small warehouse. The equipment Bogen recommended was (1) PCM2000 3 Zone Paging System, (1) TPU 250 Amplifier and (3) SPT30A Paging horns. The next step was to find a vendor to install this solution. The ...

October 31, 2023 | Fort Worth, TX

Politon helped Siemons with a two-part network project in south Fort Worth, TX. The largest part of the project was to install directional Wifi antennas in each row of the racking in their warehouse. This involved mounting both the Wifi access point and the additional external directional antenna. We numbered ...

October 27, 2023 | Lewisville, TX

Hilti wanted a new paging system mainly for emergency pages throughout the facility. We installed around 14 of the Valcom 30-watt paging horns and four ceiling-mounted speakers through the open areas of the office. This project took several of our techs about a week to complete. The customer was very happy ...