Recently Completed Jobs by Politon

August 27, 2021 | Carrollton, TX

We ended up repairing the LC connectors on six strands of the single-mode fiber. Luckily the cable was lowered to the ground which allowed easy access to the cable the challenging part was there was very little slack to work with. To reinforce the fibers we had to use heat ...

August 27, 2021 | McKinney, TX

We ended up installing all the data cabling, data rack, network switch, Wifi access point, and NVR. We helped the doctor get her office up and running. The customer provided their own security cameras and NVR but we installed the cameras and the cabling back to the NVR. There were ...

August 6, 2021 | Fort Worth, TX

We installed a SIP gateway paging solution that allowed their Ring Central phones to be able to page out to a traditional analog paging system. The customer wanted us to move one existing 5-watt Valcom paging horn and to add one new horn. We provided a Valcom VRCPA (Valcom Ring ...

August 5, 2021 | North Richland Hills, TX

The customer had has come out again to pull a new fiber between these two buildings into the new conduit that was installed much deeper underground. The school has also marked the path of this new conduit and fiber for future reference. The problem in the past is they did ...

August 3, 2021 | Dallas, TX

Our contact wanted to update their network cabling to all Cat 6 from what they currently have which is Categroy 5. They also wanted us to clean up their data rack and install wire management.

July 19, 2021 | Fort Worth, TX

There were several solutions we installed here in addition to the new Cat 6 data cabling. We installed wall mount brackets with Cat 6 HDMI extensions from their NVR to allow two employees to view the security cameras from their offices. We provided two sets of HDMI extenders by Calrad. The customer ...

July 14, 2021 | Haslet, TX

We ended up installing (13) Wifi Access Points at this Haslet location as well as (40) Cat 6 data cables to pack outstations. We used 24" X 24" 1/2" plywood for the backboards and painted them fluorescent orange per the customers' request for the pendant-mounted access points. The customer let us install their new Cisco POE ...

July 9, 2021 | McKinney, TX

The best solution for this customer was a 6 strand multi-mode armored fiber between the first floor and the fourth floor to join two businesses that recently merged. The armored wrap protects the fiber without having to install costly innerduct which is more expensive and a less efficient installation. The fiber ...

July 8, 2021 | Corinth, TX

This customer wanted a low-cost solution so they opted out of using patch panel and just wanted us to put male RJ-45 ends on the cable and plug them directly into their switch. At the end-user side, the builder used dual-gang boxes so we had to find a dual gang ...

June 30, 2021 | Flower Mound, TX

We installed a 6 strand multi-mode fiber optic cable and two Cat 6 cables between the first and second floor of the professional building attached to Texas Presbyterian Hospital in Flower Mound, TX. This job was pretty straightforward with no issues. We did have to penetrate some firewalls which we fire caulked ...

June 23, 2021 | Arlington, TX

We installed a 6 strand multi-mode fiber optic cable between the first-floor network closet and an office recently bought by the practice on the second floor. It took about six hours to install, terminate and certify the fiber.

June 16, 2021 | Dallas, TX

We installed 24 LC multi-mode connectors on three different 6 strand fiber optic cables. After we terminated them we tested and certified each strand between the main data closet and the three IDF closets.

June 8, 2021 | Irving, TX

This new customer is building a new corporate headquarters and in the process, their fiber optic cable to their building was cut in two twice.  We received this call about 4:00 pm on a Tuesday evening and we couldn't make it there until about 8:30 pm.  Once we arrived we assessed the ...

May 14, 2021 | Haslet, TX

We installed a solution we had not done before and it's working well. The customer asked us to install a point-to-point antenna inside a warehouse to extend a data circuit over 1000 feet. There was no reason it should have not worked but we had never installed a point-to-point inside before. ...

April 20, 2021 | McKinney, TX

Troptracer awarded this project to us because we have a Fluke DSX 5000 and could test, record results and email them for each data cable. We ended up testing and documenting all the existing cable and their issues. We also fixed a fiber optic issue while we where there. The patch ...