April 9, 2020 | Euless, TX
Our solution consisted of two NanoBeam AC Gen 2 Bridges and two Ubiquiti Ethernet Surge protectors. We mounted the Nano Beams on 1.5" pipe and fastened the surge protector with a self-tapping screw to the pipe through a previously drilled pilot hole. We used 14 gauge ground wire with a crimp-on connector to ...
April 7, 2020 | Richardson, TX
Golds Gym contacted us to repair or replace their emergency phone in their pool area at there Richardson TX location. We went on-site to discover there old emergency pool phone was rusted and corroded. We took the old one out, tested the phone line, cleaned the wall and installed the ...
March 11, 2020 | Cedar Hill, TX
We went on-site to troubleshoot the network cabling at this Cedar Hill, TX facility. When we arrived we discovered several problems with why the TVs would not get a network connection. There was a few TVs that had there network connection plugged into the telephone jack so that was an ...
March 7, 2020 | Mesquite, TX
We went on-site and determined this was basically two network cabling projects. The easier project was the Cat 6 cabling that would be running to the IDF cabinet at one end of the building. This IDF was connected back to the main data room with OM3 multimode fiber optic cabling. The ...
March 6, 2020 | Dallas, TX
We provided a turn-key projector installation solution for Smart City Apartment Locators. We provided a universal Epson projector mount which is a really solid universal mount. We had to utilize a one-man bucket lift to mount the projector on the ceiling with a super strut. We spanned two joists with ...
February 19, 2020 | Fort Worth, TX
We installed a wifi solution in Fort Worth, TX for a Locus Robotics project. This project required custom painted backboards for the wifi Ap's, Cat6 dual wire runs to each wifi access point, fiber optic cabling between two separate IDF cabinets, UPS installation and mounting customer provided switches. In layman's ...
February 5, 2020 | Dallas, TX
Our tech arrived on-site and consulted with our point of contact and quickly went to work pulling a Cat 6 cable to a designated spot by Landmarks IT Administrator for installation of the Cisco AP. Jose our technician installed the AP and patched it into the network switch. We called our ...
February 4, 2020 | Plano, TX
Politon, Inc. installed seven new data wire runs within the office space. Part of this project was to move an existing patch panel to a horizontal rack mount along with a new network switch and firewall that was provided by the customer. We totally reorganized the data room to make ...
January 21, 2020 | Euless, TX
We got a call from Dalworth Restoration in Euless, TX saying they wanted to have a security camera system installed. They were in need of multiple IP security cameras that needed to be integrated into there computer network. We installed network cabling in three different buildings and connected them together ...
January 17, 2020 | Denton, TX
Politon installed the following items: - (2) 65" flat screens TV's and mounts - (2) HDMI cables from behind the TV's to a small cabinet - (2) Flush mount ceiling speakers - (1) Pyle Amplifier - (2) Stereo speaker wires - (1) Moved one existing composite cable to behind cabinet We used a combination of lag bolts ...
January 17, 2020 | Dallas, TX
We helped with Cat6 installation at there location in Dallas, TX. We also installed a customer provided camera that they use for live streaming. The two Cat6 cables we installed ran from the camera on the front of the mezzanine to the sound booth upstairs behind the camera.
January 16, 2020 | Dallas, TX
We were contacted because the customer needed a company that could install IP security cameras in Dallas, TX in a multi-family apartment building with a two-level parking garage. We installed 36 IP cameras of three different models, (6) IDF closets with switches and (1) wall mount data cabinet in the MDF room. We ...
January 9, 2020 | Dallas, TX
We had the pleasure of getting to help Avis get their network back up and running at the airport. We suspected it was a fiber optic issue. With some basic troubleshooting, we discovered that someone had hit the boot of the fiber connector breaking the fiber inside the boot. Once ...
Total: 188