Denton Network Installation, Phone Systems, WIFI, & Security Camera Installation

February 02, 2023 | Denton, TX

Our team led by Clint Polly installed four security cameras along the exterior of the building. Strategically pointed at the backyard, parking lot, front, and side porches. An interesting feature we installed at the CCC included a monitor located directly by the front door for students to be aware of their surroundings at a glance and have a sense of safety as they leave the building. A hurdle our team overcame began with the installation of the wiring for the revamped security system. As the building is multistory, there was no crawl space or attic, so we had to run conduit along the edge of the interior of the building that then penetrated to the outside of the building. However, we overcame this obstacle by adding a conduit solution with no exposed cabling for more security. Our team worked tirelessly to complete this project promptly to ensure that the students at the Christan Campus Community were comfortable walking around their own building.

November 22, 2022 | Denton, TX

Politon was asked to restore the building’s technology through the installation of all-building wifi. Politon then installed eight different wifi access points throughout the mosque, including a controller that allows for universal control over these points. Politon also provided turn-key wifi installation, which was installed throughout the corridors of the mosque and the prayer rooms on both the first and second floors. This provided lots of wifi coverage throughout the building, eventually upgrading the entire facility to a brand new computer network. The customer for this project was extremely satisfied with the work that was completed, and after building a long relationship with the workers of Politon, they are happy to say that they are loyal Politon customers.

September 15, 2022 | Denton, TX

Politon has been working with Pavlov fiber for a while, so when Redpoint apartments in Denton, TX decided to switch providers from Verizon to Pavlolv, we got called out. In order to switch the providers, an extensive amount of work must be done to cut the fiber off from Verizon to re-splice them to Pavlov fiber. It is crucial that this process be uninterrupted, so our team worked for more than twelve hours to complete the fusion-splicing in its entirety.

September 10, 2021 | Denton, TX

We have worked several tickets very similar to this one for our customer. They have Invisalign fiber installed on the surface of their walls. This was a fiber retrofit method after the apartments had been built. It's a great product for this solution but the downside is if you run the fiber down the baseboard every time a tenant bumps the baseboard with the foot of their bed they can possibly damage the fiber. Students moving in and out and bumping the walls is the main issue with this fiber. To troubleshoot and fix the fiber is relatively easy. We typically start by attaching our VFL (visual fault indicator) aka laser to the head end of the fiber at the ONT and look for a light terminating from a break. I have included a few pictures of this here as well. Once the break is located it's just a matter of using your fusion splicer to splice on a new piece of fiber and then test again. With years of experience and some very expensive tools, it is relatively easy to repair fiber in multi-family housing.

August 31, 2021 | Denton, TX

To get to a resolution on this trouble ticket we worked for them was a multi-step process. First, we had to do a port audit which involved patching in a laptop doing a continuous ping into every network switch port in each of ten network closets across the property. This involved checking about five hundred network ports. Once we discovered and documented the bad ports we submitted our findings to our customers and they would determine which switches we would be replacing. All in all, we replaced about 8 switches that had damaged network ports due to the power surge from the lightning storm.