Services area

Network, Phone, WIFI & Security Camera Installation in Glenn Heights, TX

As a telecommunications and data infrastructure installation company with years of experience in the telecom and data world, Politon is your one-stop solution for businesses seeking to implement a complex solution in technical environments. For our clients, Politon provides network cabling and services including fiber optic installation and repair; Cat 6 cable installation and testing as well as security camera installations; Wifi and AV installations.

Located in the Dallas-Fort Worth Metroplex, we are uniquely positioned in the middle of the country to quickly and efficiently service national customers as well as those based in Glenn Heights, TX and other cities throughout North Texas. We service both stand-alone businesses and nationwide customers, helping business owners resolve their communications and data transmission issues while boosting their performances on the bottom line.

Our relationship with our customers, technicians, and vendors is our primary strength and the secret to our success.

Communications & Data Transmission Services by Politon in Glenn Heights, TX

Among the network infrastructure services we provide to customers include:

Rely on Politon for Your Network Infrastructure Services in Glenn Heights, TX

As a business owner, you need to send clear, concise, and accurate messages to potential customers to maximize your profit margin. That requires reliable cabling and network services, phone systems, and commercial audio/visual services. The pros from Politon provide that for you, along with national rollout services, for customers in Glenn Heights, TX and throughout the Dallas-Fort Worth Metroplex. When you need our services, contact us online or give us a call at 214-441-7173.

Schedule an Estimate


Fields with (*) are required.

Our customers love us!

See All 53 Reviews
Customer Reviews from Glenn Heights and Surrounding Areas ( 5
from 12 reviews )

Happy Customers across Glenn Heights and Surrounding Areas

Completed Jobs from Glenn Heights and Surrounding Areas

See All

October 26, 2020 | Midlothian, TX

This customer thought they had damaged their fiber between their main building and their repair center down a hill on their property. When we inspected the fiber we noticed they had armored 6 strands multi-mode fiber optic cable running through the conduit. The cable did not appear damaged so we decided to shoot a Visual Fault Locators laser through the strands. The first strand was good and the second strand was very faint on the other end with laser coming through. Fortunately, they had a spare strand with an ST connector on it and we put the VFL on it and it tested good. We plugged both into their media convertor and the link lights came on. After calling the local contact he could see the network switch and said they are back up and running. This was just an issue of a bad strand or possibly connector but the customer did not want to resolve the issue but simply switch to a back up fiber and keep running. They where very happy with our service and gave us a five star review for making it to there location so quickly to get them back up and running.

March 11, 2020 | Cedar Hill, TX

We went on-site to troubleshoot the network cabling at this Cedar Hill, TX facility. When we arrived we discovered several problems with why the TVs would not get a network connection. There was a few TVs that had there network connection plugged into the telephone jack so that was an easy solution. The second issue was the other two TVs were plugged into a switch with no uplink to the internet. We tested there Cat6 cable as good just to be sure the cabling would work. Then we plugged the connection into there main switch and the TVs pulled an ip address. We pulled up the weather channel on each tv to prove out our troubleshooting. Closed out the job with our customer and to please call us if they have any issues.

May 10, 2024 | Dallas, TX

We ran data cabling through three buildings on site and installed two IDF cabinets we provided to ensure full coverage and enable the customer to have a more organized network. The exterior access points were attached to arm mounts, allowing the devices to be pointed in the appropriate direction. Being flexible is part of the job, and when it became clear a route underground would not be available to us, we mounted the access point in another location to ensure the customer received the coverage they were paying for.

February 05, 2021 | Dallas, TX

We provided several solutions for Gold's Gym new corporate offices in Dallas, TX.  The main solution we provide was network cabling with over (130) Cat 6 wire runs.  The suite had an existing two-post rack and ladder rack connected to the wall.  We stripped everything off of it and supplied all-new patch panels and wire management.  We also need to move the rack two inches from the wall to allow our vertical wire manager covers to fasten correctly.  We also installed five flat-screen tvs with wall mount brackets.  Another solution was a bring your own hardware solution, we installed seven customer provided access points for wifi and we installed four customer provided switches into the rack and patched them all in.

November 29, 2023 | Duncanville, TX

The customer started their paging project by calling Bogen to get a list of equipment to install in their small warehouse. The equipment Bogen recommended was (1) PCM2000 3 Zone Paging System, (1) TPU 250 Amplifier and (3) SPT30A Paging horns. The next step was to find a vendor to install this solution. The customer called us and we did a site visit to see the site and hardware. We quoted using a 16 gauge two-strand cable daisy chained between the three 30-watt horns and made a solid paging solution. We did help the customer with their paging gateway device provided by their hosted IP phone provider (Spectrum) and had them program it correctly. Once they fixed it we could ring our test phone, the PCM2000 answered and it was all up and running. The customer was very happy with our installation team and wanted to know if we would travel to Georgia for the same solution in another facility.

Fields with (*) are required.