Projector Installation Services | Dallas-Fort Worth
Many conference rooms utilize overhead projection to allow everyone to be presented with the same information in an easily viewable size. One of the main things to be aware of when selecting a projector is the lighting in the room it will be installed in. Projector brightness is measured in ANSI lumens, a high level of lumens is required to overcome conference rooms where lighting is an issue. Brightness levels of 2000-3000 lumens overcome most lighting issues but not all. The second major factor is the projector lens which dictates the throw ratio. Depending on the distance from the projector to the screen you may need a different throw ratio to create the optimal picture.
Politon has installed many overhead projectors since 2009. Politon can source the projector that best fits your environment and budget or, if you have your own projector, we can install it for you. Typically, during installation, we run a VGA and HDMI cable from the projector to a wall-mount faceplate with female connections. If you have available a two-inch conduit under your conference table, we can source the appropriate length cables to get you connected where it works best for you. It is important to consider that different projectors may vary in number and connection types.
Some of the most common inputs/outputs on projectors are:
- HDMI
- DVI
- RGBHV
- Component
- VGA
- S-Video
- RCA Video
- Stereo
- 3.5mm
- Ethernet
If you are looking for Electric Screens, Portable & Tripod screens, Rear Projections Screens or a Manual Wall/Ceiling Screen we can help. Contact us today and find out how we can help you in your screen application.
Screen Brands:
Recent Projector Installation Jobs
