Recent Warehouse Network Installation Jobs

Recently Completed Jobs

See All

McKinney, TX

We used a few new pieces of equipment from Ubiquiti for this project. First, because of a space limitation, the customer could not have a typical Ubiquiti Dream Machine that we usually install, so instead we used the Ubiquiti Dream Router. The custom...

Fort Worth, TX

We ran the cable from their IDF to the exterior of the building. For a professional look, we drilled through the 8-inch thick concrete exterior wall, ran conduit on the interior side, and mounted the box for the time clock, as pictured. There was a p...

Duncanville, TX

The customer started their paging project by calling Bogen to get a list of equipment to install in their small warehouse. The equipment Bogen recommended was (1) PCM2000 3 Zone Paging System, (1) TPU 250 Amplifier and (3) SPT30A Paging horns. The ...

Fort Worth, TX

Politon helped Siemons with a two-part network project in south Fort Worth, TX. The largest part of the project was to install directional Wifi antennas in each row of the racking in their warehouse. This involved mounting both the Wifi access poin...

Fort Worth, TX

Politon technicians ran CAT6 cable to and installed 15 WiFi access points and 20 security cameras. The access points and cameras were provided by the customer. Politon also installed two new IDF cabinets to enable better coverage of a larger area in ...

Grand Prairie, TX

We provided a solution utilizing Ubiquiti equipment, our preferred brand due to ease of installation and use. We installed a new network cabinet in the middle of the warehouse to provide better coverage and connected it to the MDF via fiber optic cab...

Grapevine, TX

Our technicians ran 12 cables from an IDF cabinet to the area where the workstations will be. We also switched out some old IT equipment and replaced it with equipment provided by our customer.

McKinney, TX

Using materials supplied by the client, our technicians installed 10 network drops in the warehouse to each workstation. We also installed 7 APs in the warehouse and one in the office to ensure consistent coverage. Additionally, we installed a new ne...

McKinney, TX

We added two network cabinets by running shielded fiber connections into their warehouse. We then networked their CNC machines to the cabinets via CAT6 cable. Once we cabled the CNC machines, we then redid their Wi-Fi to further improve the connectio...

Dallas, TX

In order to secure their Wi-Fi connection, we added seven new Wi-Fi access points that allow their handheld RF guns to be used efficiently anywhere in the warehouse. Before the day was complete, we also installed a dual network drop to accommodat...

McKinney, TX

Politon first installed a 6U network cabinet, which was mounted on the wall with a patch panel. They also installed the customer’s network firewall and switch. From there, they installed a battery backup, which Politon mounted on a new shelf in con...

Coppell, TX

Long-time customer Ariat Boot Distribution is expanding to a new warehouse in Coppell, Texas. The building that they are expanding to was previously utilized by a tenant and needed some upgrades in order to keep up with the growing company. The...

Burleson, TX

Long-time customer Saddle Creek Burleson ran into a problem with their security guard post when their fiber box with the network gear succumbed to water damage after bad weather. In order to increase the safety of their facility in the most efficient...

Burleson, TX

The Saddle Creek South location in Burleson, Texas, requested an Ethernet drop to a time clock outside the central office. We started running a cable from cabinet 9 which is mounted 35 feet up on a post. From there, we went across the girders and ins...

Dallas, TX

Betson is a division of H Betti Industries and is located in Dallas, Texas. They contacted us to work on their paging system. Some of the existing speakers were not working; additional speakers were needed. First, we mounted new horn and flush mount ...

Burleson, TX

The Saddle Creek South location in Burleson, Texas, contacted us to install two Ethernet drops in the guard shack. Fortunately, Politon had already run fiber to the guard shack and installed a switch, making the job easier. After finding a path from ...

Fort Worth, TX

Saddle Creek Logistics Services in Fort Worth, Texas, requested additional Ethernet drops. This required changing the existing small switch to a larger switch to provide more ports. The new switch we installed made it possible to add the additional E...

Fort Worth, TX

Sam's Club in Fort Worth, Texas, was installing a conveyor system in their warehouse and asked us to add a fiber connection back to the main data room. The tasks needed to complete the job included: * Pulling six-strand armored multimode cable ...

Grapevine, TX

Located in Grapevine, Texas, Productiv Inc. had been sharing a warehouse with another tenant. When that tenant vacated, they cut most of the cables running through their data room which stopped all service to Productiv. After service was restored, th...

Irving, TX

Summit Electric Supply, located in Irving, Texas, needed additional security cameras installed. We pulled new cable to the two camera installations in the warehouse. We rerouted existing cable from the office area to the counter area for the third ca...

Justin, TX

Phoenix Assurance, located in Justin, TX, wanted 20 security cameras installed. They already had a cabinet in place with a patch panel and a couple of Hikvision DS-7600 Network Video Recorders. Ethernet cables had also been pulled to the desired loc...

Grand Prairie, TX

Baumann Springs is one of our regular customers for whom we provide data cabling solutions. The company requested some additional drops in their warehouse in Grand Prairie, Texas. Working in a fully o...

Roanoke, TX

For over a decade we have provided data cabling solutions to Saddle Creek Logistics Services. They contacted us for twenty additional Ethernet drops in their Roanoke warehouse. ...

Fort Worth, TX

We installed a SIP gateway paging solution that allowed their Ring Central phones to be able to page out to a traditional analog paging system. The customer wanted us to move one existing 5-watt Valcom paging horn and to add one new horn. We provided...

Fort Worth, TX

There were several solutions we installed here in addition to the new Cat 6 data cabling. We installed wall mount brackets with Cat 6 HDMI extensions from their NVR to allow two employees to view the security cameras from their offices. We provided...

Haslet, TX

We installed a solution we had not done before and it's working well. The customer asked us to install a point-to-point antenna inside a warehouse to extend a data circuit over 1000 feet. There was no reason it should have not worked but we had nev...

McKinney, TX

This project was a bring your own hardware solution where Dominion Voting provided the security cameras and just needed a company to partner with to install the cable, conduit, and cameras. The only exciting part of this job was someone walking behi...

Irving, TX

We cabled the new lab for GreyStone Laboratories.  We pulled 13 cables and installed a Leviton Quick Disconnect 24 Port Patch Panel.  We also provided a 24 port Netgear POE switch. The customer was extremely happy with the final result.  This cust...

Fort Worth, TX

Our techs ran six Cat 6 network cables from the production area for several manager desks in a bull pen-type area back to the server room.  We provided surface mount  2 port Leviton boxes at each of the three desks.  The customer wa...

Carrollton, TX

We provided the customer with a quote to install approximately 12 wifi access points across their warehouse for use with their bar code scanners while picking orders.  The customer had several problems upon our network site survey and that was they ...

TRW

Lewisville, TX

We provided a total network infrastructure solution composed of Cat 6 data cabling, WiFi installation as well as twelve security cameras with an NVR that has 8 TB of storage at there new Lewisville, TX facility. The installation spanned two buildings...

Haslet, TX

Politon, Inc. was chosen to install the computer network at Ariat's new 1,000,000 sq ft facility in Haslet, TX just next door to Alliance airport. We have really specialized in large warehouse installations in the last several years especially with ...

Arlington, TX

This customer wanted to utilize us to install a new IT network throughout there facility. We installed a new IDF in the back of the warehouse with fiber going to an intermediate IDF in the middle of the building. The previous tenant had fiber ran t...

Fort Worth, TX

This installation of data cabling in Fort Worth was so we could install wifi access points in the ceiling over there procurement area. Each time the customer pulls an item off the shelf they scan the item and it updates there database on inventory a...

Fort Worth, TX

We were asked to extend the demarc from the customer's demarc room to there data rack in the next room. Our tech utilized Cat 6 cable for the installation and ran it through the ceiling space. We utilized male RJ45's ends on both ends of the cable....

Euless, TX

Our solution consisted of two NanoBeam AC Gen 2 Bridges and two Ubiquiti Ethernet Surge protectors. We mounted the Nano Beams on 1.5" pipe and fastened the surge protector with a self-tapping screw to the pipe through a previously drilled pilot hol...

Fort Worth, TX

We installed a wifi solution in Fort Worth, TX for a Locus Robotics project. This project required custom painted backboards for the wifi Ap's, Cat6 dual wire runs to each wifi access point, fiber optic cabling between two separate IDF cabinets, UPS...

Pilot Point, TX

G&P Storage contacted was wanting a company that could perform security camera installation in Pilot Point, TX. After we assessed the property we recommended a 10 camera system with extended range infrared 4-megapixel cameras. Not only did we install...

Denton, TX

We provided multiple solutions for Alliance Air. We were contacted to install Cat6 data cabling to each office as well as build out the data closet. We installed wifi access points in the new hanger and also connected two hangers together with fiber ...

Fort Worth, TX

Politon recently completed a Fort Worth data cabling project composed of 150 Cat6 cables, a network cabinet, and wall mount wire trays. This project is for a new distribution system of a very popular perfumed product that our employees have previousl...

Fields with (*) are required.